CNC bending is a process that uses a computer-controlled hydraulic press brake to fold sheet metal to a programmed angle and radius, usually performed right after laser cutting to form boxes, frames, or channels.
Kim Phat provides a complete cutting and CNC bending service in Phu My on a 180-ton hydraulic press brake, for sheet metal parts that need angle folds, boxes, channels, or frames formed to a technical drawing.
Because cutting and bending happen at the same workshop, parts move straight from laser cutting into bending with no intermediate shipping time, shortening the schedule for urgent orders.
| CNC hydraulic press brake specification | Value | |
|---|---|---|
| Bending force | 180 tons | |
| Working bed length | 3,200 mm | |
| Working bed width | 400 mm | |
| Distance between the two columns | 2,700 mm | |
| Ram stroke | 200 mm | |
| Open height | 570 mm |
Data source: the Equipment page on Kim Phat. Actual bending capability for each part (maximum thickness, bend radius) depends on the material and is confirmed at the time of quoting.
Parts suited to CNC bending
The 180-ton hydraulic press brake with a 3,200mm bed suits both small individual parts and long parts, commonly seen in electrical cabinet production, workshop structures, and industrial drainage channels.
- Flat sheet steel, stainless steel, aluminum
- Channels, boxes, structural metal frames
- Equipment housings, electrical cabinets, assembly parts to drawing
Why B2B customers check machine specs before ordering
For industrial orders, customers usually need to confirm the machine can handle the bend length, bending force, and material thickness of the part before sending the final drawing. The spec table above lets customers quickly check this themselves before contacting us for a quote.
Combining laser cutting and bending in one process
For parts that need both profile cutting and angle bending, Kim Phat runs both steps continuously at the workshop: laser cutting the flat profile, then bending to the angle and radius required on the drawing, reducing variance between steps compared to outsourcing through multiple vendors.
Related services
Frequently asked questions about CNC bending service
What is the maximum bend length on the CNC press brake at Kim Phat?
The bending bed is 3,200mm long, suited to most electrical cabinet parts, structural frames, and standard industrial channels.
What is the maximum material thickness that can be bent?
Maximum thickness depends on the material, bend radius, and the 180-ton bending force of the machine. Kim Phat confirms specific bending capability once it receives your detailed drawing.
Do you bend parts that were already cut elsewhere?
Yes. Kim Phat accepts bending for blanks already cut elsewhere, as long as the size and thickness fit the machine bed.
Do you accept small orders for CNC bending?
Yes, Kim Phat accepts both small quantity orders and bulk factory orders.
Need CNC bending to a drawing in Phu My?
Send your drawing with thickness and material for Kim Phat to confirm bending capability and provide a quote.
Send a drawing for a quote
